Current Location： Home > News > Chemical Knowledge > Properties and uses of butadiene-starting materials for industrial use

[Chemical Knowledge]：Properties and uses of butadiene-starting materials for industrial use

Read： 653 Time：20months ago Source：Transform the World with Simplicity

The nature and use
of industrial butadiene-starting materials
1. Introduction

butadiene is an important raw material for the production of chemical products, widely used in synthetic rubber, plastics, fibers and other fields. The industrial butadiene-starting material is an important auxiliary material in the butadiene production process, which is of great significance to ensure the stable and efficient operation of the butadiene production line. This article will detail the properties and uses of industrial butadiene-starting materials.

2. the properties of industrial butadiene-driving material

industrial butadiene-driving material is a colorless and transparent liquid with a special smell. Its main component is butadiene, and it also contains some additives and solvents. Industrial butadiene-starting material has good stability and oxidation resistance, can remain stable under harsh conditions such as high temperature and high pressure, and is not easy to decompose or deteriorate. In addition, the industrial butadiene-starting material also has a low viscosity and high volatility, easy to transport and use in the production line.

3. the use of industrial butadiene-start-up materials

industrial butadiene-start-up materials play an important role in the butadiene production line. The main uses are as follows:

1. Cleaning the production line

Before or after the butadiene production line is put into production, the production line needs to be cleaned with industrial butadiene-start-up materials to remove impurities and residues inside the equipment and ensure the cleanliness and normal operation of the production line.

2. Adjusting the pressure of the production line
the
butadiene production line needs to maintain a certain pressure to operate stably, and the industrial butadiene-driving material can be used to adjust the pressure of the production line. By injecting an appropriate amount of industrial butadiene-starting material into the production line, the pressure of the production line can be increased and the stable operation of the production line can be maintained.

3. Protection of equipment

additives and solvents in industrial butadiene-starting materials can protect equipment, reduce equipment wear and corrosion, and extend the service life of equipment.

4. precautions

When using industrial butadiene-starting materials, you need to pay attention to the following matters:

1. Keep sealed during storage and use to avoid contact with air.

2. Check the quality and purity of industrial butadiene-starting materials before use to ensure that they meet production requirements.

3. Strictly control the dosage and pressure during use to avoid waste and safety accidents.

4. Clean the equipment and pipelines in time after use to avoid the impact of residues on the production line.

In short, industrial butadiene-starting materials play an important role in the butadiene production line, which is of great significance to ensure the stable and efficient operation of the production line. It is necessary to pay attention to safety and quality control during use to ensure the normal operation of the production line and the stability of product quality.

Previous： Properties and uses of industrial hexane

Next： Properties and Uses of Cracked Carbon IX-Start-up Materials for Industrial Use

News Categories