Current Location： Home > News > Chemical Knowledge > The role and advantages of inspection wells

[Chemical Knowledge]：The role and advantages of inspection wells

Read： 760 Time：14months ago Source：Transform the World with Simplicity

As an important part of sewer system, the role of inspection well can not be ignored. Through the inspection well, we can realize the inspection, cleaning, repair and other work of the sewer pipe, so as to ensure the normal operation of the sewer system. Below, we will introduce you in detail the role of the inspection well and its advantages.

1. the role of the inspection well

1. check the pipeline: through the inspection well, you can easily observe the internal situation of the sewer pipeline, timely detection of water in the pipeline, blockage, leakage and other issues, and timely take the necessary measures to deal with, to avoid more serious consequences.

2. Cleaning pipeline: The wellhead is set up at the inspection well to allow people to conveniently clean the sewer pipeline. At the same time, the cleaning work always revolves around the inspection well, which can effectively protect the pipeline of the sewer system and prevent the pipeline from being damaged by excessive force during cleaning.

3. Maintenance of pipelines: With the help of inspection wells, pipelines in the sewer system can be repaired and replaced. Because the inspection well can easily enter the inside of the pipeline, the maintenance work can be more accurate and precise, so as to ensure the normal operation of the pipeline.
The advantages of
2. inspection wells

1. Convenient maintenance: Because the inspection wells are set in the pipeline, it is very convenient to maintain. When the pipeline needs to be repaired or replaced, it can be operated directly at the inspection well without consuming more time and manpower.

2. Improve efficiency: The setting of the inspection well can avoid frequent opening of the ground for maintenance and replacement, thereby improving work efficiency. In an emergency, the maintenance work of the pipeline can be carried out directly through the inspection well, which greatly shortens the processing time.

3. Cost reduction: Due to the existence of inspection wells, the number of pipeline maintenance and replacement can be reduced, and unnecessary expenses can be avoided. In addition, during the cleaning work, the setting of the inspection well can also make the cleaning work more accurate and effective, thereby reducing the waste of manpower and materials.

3. inspection well construction problems

1. Wellhead setting: When constructing the inspection well, it is necessary to pay attention to the wellhead should be set on a flat ground to facilitate people's operation. At the same time, anti-slip bricks or anti-slip iron plates should be laid around the wellhead to ensure the safety of operators.

2. Horizontal position: The horizontal position of the inspection well should be strictly kept horizontal, otherwise it will affect the normal operation of the sewer system.

3. Material selection: When constructing an inspection well, materials with strong corrosion resistance and compression resistance should be selected to ensure the service life and stability of the inspection well.

4. summary

Through the introduction of this article, we understand the role of the inspection well and its advantages, as well as the construction of the inspection well need to pay attention to the problem. The inspection well occupies an important position in the sewer system and is an important measure to ensure the normal operation of the sewer system. At the same time, before using the inspection well, the corresponding planning and design should be carried out according to the actual needs to ensure the effectiveness and service life of the inspection well.