Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of magnesium silicate

[Chemical Knowledge]：Manufacturing method and process of magnesium silicate

Read： 1131 Time：19months ago Source：Transform the World with Simplicity

magnesium silicate manufacturing method

1. introduction

magnesium silicate as an important chemical production of raw materials, widely used in ceramics, building materials, chemical and other fields. This article will introduce the manufacturing methods of magnesium silicate in detail, including raw material preparation, synthesis reaction, post-treatment and other processes, in order to provide reference for the production of related fields.

2. Raw Material Preparation

1. Magnesium Source: Magnesium oxide, magnesium hydroxide or magnesium carbonate is usually used as the magnesium source. These raw materials have a high purity and can provide the magnesium element required for synthesis.
2. silicon source: commonly used silicon source has silicon dioxide, silicate and so on. Choosing a suitable silicon source can ensure the smooth progress of the synthesis reaction.
3. Solvent: According to the needs of the synthesis process, an appropriate solvent is selected to promote the reaction. Commonly used solvents are water, ethanol, etc.

3. synthesis reaction

1. wet synthesis: magnesium source and silicon source in accordance with a certain proportion of the solvent, fully stirred and mixed, so that the raw materials fully contact the reaction. The reaction temperature, pH value and other factors need to be controlled during the reaction to ensure the smooth progress of the reaction.
2. Dry synthesis: After the magnesium source and the silicon source are fully mixed, high-temperature calcination is carried out to make the raw materials undergo solid-phase reaction to generate magnesium silicate. This method requires a high reaction temperature, while controlling the calcination atmosphere and time.

4. Post-Treatment

1. Washing: The reaction product is washed with a solvent to remove unreacted raw materials and impurities.
2. Drying: The washed product was dried to obtain a dry magnesium silicate powder.
3. Crushing: According to needs, the dried magnesium silicate powder is crushed to obtain a product with a certain particle size.
Precautions for
5.

1. During the synthesis process, the proportion of raw materials and reaction conditions must be strictly controlled to ensure the generation of higher purity magnesium silicate.
2. In the process of post-treatment, pay attention to the operation specification and safety to avoid dust pollution and potential safety hazards.

6. Conclusion The manufacturing method of

magnesium silicate includes raw material preparation, synthesis reaction and post-treatment. By strictly controlling the operating conditions and parameters of each process, magnesium silicate products with high purity and suitable particle size can be obtained. In actual production, suitable manufacturing methods can be selected according to specific needs and conditions to improve production efficiency and product quality.

Previous： Production and manufacturing method and process flow of sodium thiosulfate

Next： Manufacturing method and process of magnesium aluminum silicate

News Categories