Current Location： Home > News > Chemical Knowledge > The production and manufacturing method and process flow of adhesive.

[Chemical Knowledge]：The production and manufacturing method and process flow of adhesive.

Read： 791 Time：19months ago Source：Transform the World with Simplicity

The manufacturing method
of adhesive
1. Introduction

adhesive plays an important role in the production of various chemical products, especially in the fields of composite materials, building materials, textiles and packaging industries. Therefore, it is of great significance to study and master the manufacturing method of adhesive for improving product quality and production efficiency. This paper will introduce the manufacturing method of adhesive in detail, including the selection of raw materials, formula design, production process and quality control.

2. Raw material selection

1. Main material: The main material of the adhesive is usually a polymer compound, such as polymer, resin, etc. When selecting the main material, it is necessary to consider its bonding performance, weather resistance, heat resistance, cold resistance and other performance indicators.
2. Additives: In order to improve the performance of the adhesive, it is necessary to add some auxiliary materials, such as curing agent, accelerator, filler, toughening agent, etc. The selection of additives needs to be screened according to the specific use and performance requirements of the adhesive.

3. formulation design

adhesive formulation design needs to consider the following aspects:

1. The ratio of main material to additives: It is necessary to determine the appropriate ratio according to performance indicators and experimental data.
2. Compatibility between additives: It is necessary to ensure that there is no chemical reaction or mutual interference between additives, which will affect the performance of the adhesive.
3. Viscosity adjustment: By adjusting the proportion of each component in the formula, the viscosity of the adhesive can be controlled to meet the requirements of different construction conditions.

4. production process
The production process of
adhesive mainly includes the following steps:

1. Ingredients: Add raw materials and additives to the mixing equipment according to the proportion of the formula.
2. Stirring and mixing: The components are fully mixed and homogenized by stirring equipment.
3. Grinding: For adhesives that need to increase the fineness, they need to be ground to obtain more delicate colloids.
4. defoaming: remove the bubbles in the adhesive by vacuum defoaming or mechanical defoaming to improve its performance.
5. Packaging: The prepared adhesive is packed into an appropriate packaging container, labeled and stored.

5. quality control

In order to ensure the stable and reliable quality of the adhesive, comprehensive quality control is required, including the following aspects:

1. Quality control of raw materials: Quality inspection of raw materials to ensure that they meet Relevant standards and regulations.
2. Quality control of the production process: comprehensively monitor the production process to ensure that the production process parameters and product quality meet the predetermined requirements.
3. Finished product inspection: test the performance of the produced adhesive, including bond strength, weather resistance, heat resistance, cold resistance and other indicators to ensure that the product meets relevant standards and customer requirements.

6. conclusion The manufacturing method of

adhesive involves many links and factors, including raw material selection, formula design, production process and quality control. In order to improve the performance and production efficiency of adhesives, these factors need to be fully considered and optimized. At the same time, continuous research and exploration of new manufacturing technologies and methods is also an important way to promote the development of the adhesive industry.

Previous： Production method and process flow of dimethylol butyric acid

Next： Production and manufacturing method and process flow of chromium oxide

News Categories