Current Location： Home > News > Chemical Knowledge > Production and manufacturing method and process flow of polyether modified silicone oil

[Chemical Knowledge]：Production and manufacturing method and process flow of polyether modified silicone oil

Read： 723 Time：19months ago Source：Transform the World with Simplicity

1. of manufacturing method
of polyether modified silicone oil Introduction

polyether modified silicone oil is a kind of material which has important application in the field of chemical production raw materials. Due to its unique properties, such as good lubricity, water resistance, heat resistance and oxidation resistance, it is widely used in plastics, rubber, fiber, paint, cosmetics and other fields. This article will introduce the manufacturing method of polyether modified silicone oil in detail.

2. Materials and Equipment

1. Materials: Cyclosiloxane, polyether, catalyst, capping agent.
2. Equipment: reaction kettle, stirrer, thermometer, condenser, vacuum pump.

3. manufacturing method

1. pretreatment: the cyclic siloxane, polyether, catalyst according to a certain proportion of added to the reaction kettle, stirring.
2. Polymerization: At a certain temperature, the polymerization reaction is initiated to generate polyether modified silicone oil. This process needs to control the reaction temperature and reaction time to ensure the molecular weight and molecular weight distribution of the product.
3. Post-treatment: After the completion of the reaction, a capping agent is added to stop the reaction. Then, vacuum degassing was performed to remove unreacted monomers and low molecular by-products.
4. product packaging: the polyether modified silicone oil is filtered, tested and packaged to obtain the finished product.
Precautions for
4.

1. Strictly control the reaction temperature and reaction time to prevent the product molecular weight from being too large or too small.
2. Pay attention to the selection and dosage of the catalyst to ensure the smooth progress of the reaction.
3. In the post-treatment process, the degree of vacuum should be ensured to remove unreacted monomers and low-molecular by-products as much as possible.

5. conclusion

Through the above manufacturing method, we can get polyether modified silicone oil with excellent performance. This kind of silicone oil has a wide range of applications in plastics, rubber, fibers, coatings, cosmetics and other fields, which can improve product performance and service life. At the same time, the manufacturing method is simple to operate, the raw materials are easy to obtain, and has a good prospect of industrialization.

6. prospect

With the continuous development of science and technology, the performance requirements of polyether modified silicone oil are also increasing. In the future, we need to further explore and study the manufacturing process of polyether modified silicone oil to improve its performance and application range. At the same time, research and development of new catalysts and capping agents are also needed to improve manufacturing efficiency and product quality. In addition, with the improvement of environmental awareness, the environmental protection requirements in the chemical production process are also getting higher and higher. Therefore, it is necessary to research and develop more environmentally friendly manufacturing methods to reduce pollution emissions in the production process and improve the sustainability of production.

In short, polyether modified silicone oil, as an important raw material for chemical production, has broad application prospects in the future development. We need to continuously study its manufacturing process and technology in depth to meet the growing market demand, while improving production efficiency and quality, and promoting the sustainable development of the chemical industry.

Previous： Production and manufacturing method and process flow of ethylene glycol diacetate

Next： Production and manufacturing method and process flow of cyclohexylamine

News Categories