Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of semi-extinction bamboo section

[Chemical Knowledge]：Manufacturing method and process of semi-extinction bamboo section

Read： 342 Time：19months ago Source：Transform the World with Simplicity

The manufacturing method
of semi-extinction bamboo
1. Introduction

With the progress of science and technology and the improvement of environmental awareness, bamboo is more and more widely used in the field of chemical production raw materials. As an important raw material for chemical production, semi-extinction bamboo has high economic value and use value. This article will detail the manufacturing method of semi-extinction bamboo joints.

2. Materials and Methods

1. Material

(1) Bamboo: Select bamboo that grows well and has no pests and diseases, and sawing it into a section of 1 meter in length.

(2) matting agent: choose environmentally friendly, non-toxic matting agent.

(3) Other auxiliary materials: such as water, preservatives, etc.

2. Equipment

(1) Sawing machine: used to saw bamboo into the specified length.

(2) cooking equipment: used for cooking bamboo.

(3) polishing machine: used for polishing the bamboo section.

(4) Mixer: used to mix matting agent and other auxiliary materials evenly.

3. manufacturing method

(1) bamboo preparation: bamboo sawing into a length of 1 meters, remove the bamboo leaves and roots, clean.

(2) Cooking treatment: Put the bamboo into the cooking equipment and cook it under appropriate temperature and pressure to make the bamboo soft and easy to process.

(3) skin planing treatment: use a skin planing machine to remove the green skin on the surface of bamboo, exposing the light yellow bamboo meat part.

(4) polishing treatment: use a polishing machine to polish the bamboo section to make the surface smooth.

(5) Stirring matting agent: Put the matting agent and other auxiliary materials into a blender and stir evenly to prepare a matting agent solution.

(6) Apply matting agent: Use a brush or spray gun to evenly apply the matting agent solution on the bamboo joint surface, paying attention to the appropriate thickness.

(7) Drying treatment: Put the bamboo knots coated with matting agent in a dry place to dry naturally, or use drying equipment to dry.

(8) Quality inspection: quality inspection of semi-matted bamboo joints after drying, including appearance, gloss, hardness and other aspects.

3. Results and Discussion

Through the above manufacturing method, we can obtain semi-extinction bamboo joints with smooth surface and certain gloss. Compared with the traditional full extinction bamboo, semi extinction bamboo has a certain ability to reflect light, making its appearance more beautiful and generous. At the same time, due to the use of environmentally friendly, non-toxic matting agents and other auxiliary materials, the manufacturing process of semi-matting slubs is more environmentally friendly and healthy.

in the discussion, we can discuss the possible problems in the manufacturing process of semi-extinction bamboo, such as the choice of bamboo, the temperature and pressure of cooking treatment, the degree of polishing treatment, the choice of matting agent and the coating thickness and other factors on the quality of semi-extinction bamboo. At the same time, we can also discuss the application and value of semi-extinction bamboo in different fields, as well as its future development trend and prospects.

4. Conclusion

Through the above manufacturing method, we can obtain semi-extinction bamboo joints with smooth surface and certain gloss. Compared with the traditional full-extinction bamboo, the semi-extinction bamboo is more beautiful in appearance, and the manufacturing process is more environmentally friendly and healthy. In the future development, semi-extinction bamboo is expected to be more widely used and promoted in the field of chemical production raw materials.

Previous： The production and manufacturing method and process flow of the light-shaped mother wire.

Next： Manufacturing method and process of semi-extinction POY

News Categories